How to clean up when the material residue left inside the screw press dewatering machine?

There are many kinds of screw press machine on the market which provides a lot of convenience for the materials pressing. Such as double screw press machine, single screw press machine, kitchen waste screw press machine, etc. So what do you need to pay attention to when cleaning the residue on the press equipment? Let's learn it in detail.

1.Open the screw press machine, check whether there is material residue inside. Do be careful to your hand.

2.If there are material residue left, you can carefully clean it out by using rags and other tools. Of course, if not cleaned for a long time, it will stick to machine wall, then you need to scrub patiently.

3.When cleaning the residue of the screw press machine, open the chassis to check whether there is blockage. Once there is blockage, you need dredge it as soon as possible, so as not to affect the normal operation.

4.Of course, if you find other problems with the equipment, you should also pay attention to repair it as soon as possible.

5.Be sure to protect yourself during the cleaning process.

The above is the problem when cleaning the residue of the screw press machine, you can refer to when cleaning the equipment.